MDE750 - Bare Fibre Holder (Mechanical), Long Reach

Bare Fibre Holder (Mechanical), Long Reach   

MDE750 -

• Very easy to use
• Clamp force adjustable from 25 to 125 g
• Contact point on fibre is a resilient pad
• 125/250 µm fibre with a jacket up to 1 mm diameter
• Fibre held in user-replaceable V-groove by spring clamps
• Clamp arm swings clear of V-groove for easy loading of fibre

Long reach fibre holder for bare fibre (US: fiber). Fibre held in user-replaceable V-groove by spring clamps (as on MDE710. Includes Universal Base MDE752 which allows fibres to be located offset from central axis.

The model MDE750 Fibre Holder features a double V-groove and clamp arms to hold 125/250 µm fibre with a jacket up to 1 mm diameter. The clamp arms swing clear of the V-groove, and the clamp forces can be adjusted from 25 to 125 g, making the unit very easy to use.

A comprehensive range of fibre holders using vacuum, magnet or spring-loaded clamps is available. User replaceable V-grooves enable the user to work with different fibre sizes economically. Custom grooves are our speciality.

All accessories are compatible with the Elliot Gold™ Series flexure stages. The optical axis height is 18 mm above the platform surface and on the centre line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The clamp set (MDE154) is available separately if required.

Specifications

Nominal Weight : 0.054Kg

For use with MDE330 Flexure stage

MDE330