MDE251-15 - XY Precision Centring Micropositioner (Large Bore Version)
Limited Stock
MDE251-15 - XY Precision Centring Micropositioner (Large Bore Version)
- Stock: In stock - Contact us for lead times.
- Click here to: Contact us
- Model: Martock MDE251-15
£596.00
Large Bore XY Precision Centring Small Micropositioner
MDE251-15
- Travel ± 1 mm
- Stainless steel body
- Large 15 mm Ø bore
- For use where space is limited
- Wide range of configurations
- Two independent dovetail slides
- Fine thread 0.25 pitch adjusters
- Very smooth backlash-free motion
- No interaction between X & Y axes
The MDE251-15 is a large bore, small XY precision centring mount with simple adjusters for optic micropositioning.
| Specifications | |
| Travel | ± 1 mm X and Y |
| Sensitivity | < 0.5 µm |
| Adjusters | 0.25 pitch |
| Bore diameter | 15 mm |
| Mounting holes | Two M2 x 3.5 mm deep |
| Thickness | 13 mm |
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.
MDE251_15_202.PDF
MDE251_15_202.SLDPRT
MDE251_15_202.STEP
