MDE268-KN-3 mm travel XZ micropositioner - knurled adjusters
- Stock: In stock - Contact us for lead times.
- Click here to: Contact us
- Model: Martock MDE268-KN
3 mm travel XZ micropositioner - knurled adjusters
MDE268-KN
- Wide range of configurations
- Very smooth backlash-free motion
- Based on the Very Small dovetail slide series
- One of the smallest micropositioners available
The Elliot Scientific MDE268 slide is an ultra-small, dual axis micropositioner with simple adjusters for XZ linear translation stage applications in physics experiments or optical systems.
| Specifications | |
| Travel | 3 mm |
| Sensitivity | < 0.5 µm |
| Adjusters |
0.25 pitch with 1.27 mm hex socket eg. MDE213-HEX, 735-144 or 609-590 |
| Top plate | 12 x 12 mm |
| Mounting holes | Four M1.6 x 2 mm deep on both sides |
| Options and Accessories |  MDE265 Series Drawing Click here to download |
|
|
Knurled knob adjuster MDE213-hex Hex Key 1.27AF for simple adjusters |
||
| Post mounting using MDE857 (and MDE858 if required) | ||
| Fibre holders available: MDE719 and MDE730 | ||
|
|
||
|
|
||
|
|
||
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.
MDE268_135.PDF
MDE268_135.SLDPRT
MDE268_135.STEP
