MDE277M - Five-Axis Micropositioner with Micrometers
Limited Stock
MDE277M - Five-Axis Micropositioner with Micrometers
- Stock: In stock - Contact us for lead times.
- Click here to: Contact us
- Model: Martock MDE277M
£1,531.00
Five-Axis Micropositioner with Micrometers
MDE277M
| Tilt Features: |
|
| Centring Features: |
|
| Positioner Features: |
|
A five-axis translation stage comprising an MDE270 Precision Tilt Stage, MDE251 Precision XY Centring Micropositioner, MDE274 Adaptor Block and MDE255M Single Axis Micropositioner.
| MDE270 Specifications |  |
|
| Tilt range on each axis | 3° | |
| Sensitivity | 5 arc seconds | |
| Adjustment | Hex key | |
| Mounting options | M2 clearance holes M2.5 tapped holes M4 post-mounting (use adapter MDE274) |
|
| Clamps fitted to angular motions | ||
MDE251M Specifications |
||
| Two independent dovetail slides combined | ||
| Travel in X & Y | ± 1 mm | |
| Bore diameter | 11 mm | |
| Adjusters | Micrometer reading to 0.01 mm x2 | |
MDE255M Specifications |
||
| Travel | 10 mm | |
| Adjuster | Micrometer reading to 0.01 mm | |
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.
MDE277M_3D_56.PDF
MDE277M_56.SLDPRT
MDE277M_56.STEP
