MDE268-3 mm travel XZ micropositioner

3 mm travel XZ micropositioner

MDE268   

• Wide range of configurations
• Very smooth backlash-free motion
• Based on the Very Small dovetail slide series
• One of the smallest micropositioners available

The Elliot Scientific MDE268 slide is an ultra-small, dual axis micropositioner with simple adjusters for XZ linear translation stage applications in physics experiments or optical systems.

Options and Accessories		MDE265 Series Drawing Click here to download
Knurled knob adjuster (Sold separately as P/No. MD-054115) MDE213-hex Hex Key 1.27AF for simple adjusters
Post mounting using MDE857 (and MDE858 if required)
Fibre holders available: MDE719 and MDE730
Low magnetic version MDE268 LM  Low Magnetic&Vacuum version MDE268 LM-V
Vacuum compatible MDE268 V MDE268 KN Knurled Adjusters
MDE269 with optional MD-054115 adjusters

Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.