MDE276M - Four-Axis Micropositioner with Micrometers
Limited Stock
MDE276M - Four-Axis Micropositioner with Micrometers
- Stock: In stock - Contact us for lead times.
- Click here to: Contact us
- Model: Martock MDE276M
£1,083.00
Four-Axis Micropositioner with Micrometers
MDE276M
| Tilt Features: | |
|
|
| Centring Features: | |
|
A four-axis translation stage with micrometers comprising an MDE270 Precision Tilt Stage and MDE251M Precision XY Centring Micropositioner.
| MDE270 Specifications |  |
|
| Tilt range on each axis | 3° | |
| Sensitivity | 5 arc seconds | |
| Adjustment | Hex key | |
| Mounting options | M2 clearance holes M2.5 tapped holes M4 post-mounting (use adapter MDE274) |
|
| Clamps fitted to angular motions | ||
MDE251M Specifications |
||
| Two independent dovetail slides combined | ||
| Travel in X & Y | ± 1 mm | |
| Bore diameter | 11 mm | |
| Adjusters | Micrometer reading to 0.01 mm x2 | |
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.
MDE276M_3D_54.PDF
MDE276M_54.SLDPRT
MDE276M_54.STEP
