Fibre Holders
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE700
2 to 4.5 mm diameter Ferrule Holder
MDE700
Can also be used to hold GRIN lenses
V-groove formed by two 9 mm stainless steel rods
Nylon clamp screw avoids damage to component being held
Holds optical fibre terminated with a cylindrical ferrule
Fibre (US: fib..
£227.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE701
1 to 2 mm diameter Ferrule Holder
MDE701
Can also be used to hold GRIN lenses
V-groove formed by two 9 mm stainless steel rods
Nylon clamp screw avoids damage to component being held
Holds optical fibre terminated with a cylindrical ferrule
Fibre (US: fiber..
£222.00
Contact Us
Brand: Elliot | Martock
Model: Martock MDE705
Fibre Holder (Vacuum & Mechanical)
MDE705
Very easy to use
Very low forces on fibre
Clamp force adjustable from 25 to 125 g
Vacuum V-groove can be dismantled for cleaning
Holds 125/250 µm fibre with a jacket up to 1 mm diameter
Clamp arm swings clear ..
£560.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE709
Bare Fibre Holder (Mechanical)
MDE709
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
Holds 125/250 µm fibre (other sizes to order)
Clamp arm swings clear of V-groove for easy loading of fibre
The mode..
£192.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE710
Jacketed Fibre Holder (Mechanical)
MDE710
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
125/250 µm fibre with a jacket up to 1 mm diameter
Clamp arm swings clear of V-groove for easy loading of fibre
..
£268.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE711-250
Fibre Holder
MDE711
Simple economical design
Single fixed size V-groove for 250 µm fibre
The model MDE711 is an economical fibre (US: fiber) holder with a machined 250 µm V-groove and magnetic clamp arm for less critical applications.
The fibre holder is designed to c..
£161.00
Limited Stock
Brand: Elliot | Martock
Model: Martock MDE715
Fibre Holder (Vacuum)
MDE715
Very easy to use
Very low forces on fibre
Vacuum V-groove can be dismantled for cleaning
Holds 125 to 400 µm bare fibre
Vacuum is applied through a fine slot for even clamping of fibre
The model MDE715 Fibre Holder is desig..
£504.00
Brand: Elliot | Martock
Model: Martock MDE719
Fibre rotator for 3 mm micropositoner
MDE719
Spindle rotates 360°
Resolution 30 arc secs
Holds fibre ferrules only
Fine adjustment: ± 5° range
Fits MDE265 Series Positioners
Works with any ferrule up to 4.5 mm diameter
(Size is customer specified)
..
£384.00
Brand: Elliot | Martock
Model: Martock MDE722
Fibre Holder (Mechanical) with Spigot
MDE722
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
Holds 125/250 µm fibre with a jacket up to 1 mm diameter
Clamp arm swings clear of V-groove for easy loading of f..
£505.00
Contact Us
Brand: Elliot | Martock
Model: Martock MDE723
Custom order - Fibre Holder (Mechanical) for MDE255 and MDE260 Series Positioners
MDE723
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
125/250 µm fibre with a jacket up to 1 mm diameter
Clamp arm sw..
£505.00
Brand: Elliot | Martock
Model: Martock MDE724
Fibre Holder (Mechanical: Melles Griot/Thorlabs)
MDE724
Very easy to use
Clamp force adjustable from 25 to 125 g
Contact point on fibre is a resilient pad
Fits Melles Griot and Thorlabs flexure stages
125/250 µm fibre with a jacket up to 1 mm diameter
Cla..
£346.00
Brand: Elliot | Martock
Model: Martock MDE725-nnn
Fibre to Fibre Alignment V-Block with Clamps
MDE725-nnn
Includes V-block clamps
Can be used with index matching gel to minimise coupling loss
Quick and easy mechanical coupling of two bare fibres without splicing
The MDE725 s designed to allow two bare fib..
£549.00