ERIS, high resolution, highest stability, Analogue SLM
- Stock: Contact us for details
- Click here to: Contact us
- Model: HOLOEYE ERIS
ERIS - ALL NEW ** phase only SLMs
ERIS Series
- VIS, Telecom and NIR ranges
- High Reflectivity LCOS (Phase Only) display
- Plug and Play SLM
- 1920 x 1200 resolution, 8 µm pixel pitch
- Frame rate: 60 Hz
- Up to 92% fill factor
- 3π at 650nm
- 15.42 x 9.66 mm (0.72" diagonal) active area
- 8-bit (256 grey levels) addressing up to 10-bit phase
- Analogue Addressing ( super low Flicker operation)
|
The analog ERIS Phase Only Spatial Light Modulator extends Holoeye's broad SLM product range for applications with particular requirements where enhanced phase stability, extremely low latency and low crosstalk and up to 10 -bit operation are demanded. The ERIS SLM is a plug & play phase modulator device and can be addressed with phase functions via standard graphics cards as an extended monitor device. Addressing can be done using the supplied Pattern Generator software or the SLM Slideshow Player software or standard image viewer software. HOLOEYE also provides an SLM Display Software Development Kit (SDK) which provides APIs (Application Programming Interface) for different programming languages. The ERIS driver uses an HDMI interface for addressing phase functions and an USB connection to communicate with the driver (to changing the voltage vs. gray level distribution (gamma control) and dynamic range (voltage across the LC cell) in order to calibrate the SLM for different wavelengths). Besides this the driver features a trigger sync output to synchronize the device with external devices |
Applications
|
Model overview
Software
Each ERIS spatial light modulator ican be addressed through an HDMI interface of the graphics card no additional software or dedicated hardware is required.
The LCOS SLM device is delivered with a GUI (Graphical User Interface) based Configuration Manger software.
The Configuration Manager can be used to change geometrical settings, brightness, contrast and the electrooptical response by adjusting pixel voltages.
An USB interface is used for these advanced callibrations.
In addition a HOLOEYE SLM Pattern Generator Software is provided with the SLM:
Extra features and functions not found in the standard software are included along with a LabVIEW™ SubVi for the enhanced addressing of optical functions for home-brew applications.
Please contact us for the latest price.
Holoeye OLE Article
