FTB4– PRO PORTABLE 800G
Take 800G testing from lab to lab
Another industry first! This time EXFO delivers the industry's first portable, compact 800G test solution. Combine the FTBx-88800 Series with the latest version of EXFO’s FTB-1 Pro portable platform and easily move our 800G test solution within the lab—or from lab to lab—for the utmost in test flexibility and efficiency. The network communications industry is migrating once again—this time the shift is to 800G. Now the rush is on to develop and validate a new wave of high-speed devices. The FTBx-88800 Series empowers transceiver developers, chip makers, equipment vendors and data centers to confidently transition their solutions from lab to fab as they accelerate into hyperdrive with 800G.
Applications:
- Validate disaggregated 800G signals with confidence
- OSFP and QSFP-DD test ports
- Support for 800ZR optics
- Lab / Research Test Platforms
SUMMARY OF KEY FEATURES
- Compliance testing IEEE 802.3ba, IEEE 802.3bs, 802.3ck and 802.3df standards
- Multi-interface support QSFP-DD MSA revision 4.0, OSFP MSA revision 2.0, 4×200G, 2×400G and 8×100G and 1×800G QSFP-DD MSA revision 6.3, 2×200G and 4×100G 800G, 400G AOC and DAC cables support
- Line rate 850, 425/212.5/106.25 (single lambda) and 103.125, OIF DCO Coherent OSFP, QSFP-DD and OpenZR+
- Physical-layer validation PCS lane mapping and monitoring capability Per-lane skew generation and measurement PCS error generation and monitoring per lane Full MDIO/I2C read/write access
- Transceiver validation QSFP-DD800, OSFP800, QSFP-DD and OSFP
- Breakout cable support Verification of 2×400G, 4×200G, 8×100GE, 4×100GE and 2×200GE breakout cables providing optical Tx/Rx power, L2/L3 traffic and BERT statistics per link
- Power measurement per lane Optical channel power measurement with color indicators
- Frequency measurements Provides per lane frequency measurement of the received signal (in Hz)
- Frequency offset Offsetting of the transmitted signal's clock on a selected interface, and monitoring
- BERT framed and unframed testing using different parameters different frame sizes, including EMIX
- Service disruption time (SDT) Service disruption time measurements based on no-traffic mode, with statistics including longest disruption time, shortest, last, average, count, total and pass/fail thresholds
- Latency measurements in BERT High-resolution delay measurements integrated in the BER with statistics including current, average, maximum, minimum, count, total and pass/fail thresholds
- Error injection mode Manual, rate and continuous (maximum rate)
- Layer 2 MAC address and Ether type edition available Q-in-Q capability with the ability to go up to three layers of stacked VLANs
- Layer 3/4 Source and destination IP address configuration available, IP TOS/DSP configuration available, UDP source and destination port configuration available
- Smart loopback Return 800G Ethernet traffic to the local unit by swapping packet overhead up to layer 4
- Rx frame-size analysis 64, 65 - 127, 128 - 255, 256 - 511, 512 - 1023, 1024-1518 and > 1518
- Rx rate Line utilization (%), Ethernet bandwidth (Mbit/s), frame rate (frame/s), and frame count
- Ethernet alarms Link down, local fault detected, local fault received, remote fault, LOA
- Ethernet errors FCS, jabber, runt, undersize and oversize
- PCS lane alarms and errors LOS, LOC-lane, LOAML, excessive skew, Inv. Marker, Pre-FEC SYMB and Pre-FEC-bit
- PCS logical lane mapping Manual and random
- Pre-emphasis Pre-/main-/post-cursor options to improve electrical waveform including gray encoding
- FEC Generation and analysis of FEC correctable and uncorrectable errors, local and remote degraded SER monitoring (error-free and uncorrectable) and percentage
- FEC statistics Number of symbol errors per correctable codeword, number of pre-FEC symbol errors and bit statistics, codeword count
- Autonegotiation support Advertise local interface parameters and identify negotiated capabilities with the remote link partner
- Autonegotiation status Monitors and displays the status of the autonegotiation process, providing information on its various states
EXFO website
Terms and Conditions V6
